Category Archives: Landy Project

The rebuild of Project Sandy, a 1985 Land Rover 90 original v8

Project Sandy – GPS System

For the Land Rover project I wanted to build some type of navigation system, I had a looked about but couldnt find what I wanted within a decent budget.  I went for the idea of a tablet pc rather than building a custom car pc as when you start to add bits on to a read more »

Project Sandy – Drain plug, oops

Today I changed the transmission oil (not the gearbox oil, just the transfer box at the moment).  I have never seen the magnet used on the drain plug before but today I see the need   I don’t know when the last time the oil was changed and i have done some hard offroading recently read more »

Project Sandy Brake Pipes

Today I replaced the front brake pipes on the Land Rover.  I decided to replace the pipes with some Goodrich +2 inch extended pipes as I will be looking to increase my suspension height in the near future so I though I may aswell go for the + now rather then later.  I decided to read more »

Project Sandy Track Rod Replacement

I have finally got around to sorting out my track rod issue on the Landy, we ended up gettings a heavey duty track rod and steering arm from John Craddock (part number DA5502) . As you can see the difference in the bars is quite allot, It turns out the replacement bar we purchased last read more »

Project Sandy – Snorkel Time

Ok, I know it’s a v8 and they don’t do aswell in water, if anything at all, compared to diesels but we got a pretty much brand new Mantec wingtop snorkel at a bargain and just the one I would have wanted.